• FOB FOC Installat... For more great information about water treatment, subscribe! / waterstoremidland Follow me https://www.facebook.com/TheWaterFilt... https://twitter.com/FilterEstore https://www.linkedin.com/company/the-... or email info@TheWaterFilterEstore.com or info@TheWaterStoreMidland.com Check out our online store at https//www.TheWaterFilterEstore.com or our full service store in Midland, Ontario at https//www.TheWaterStoreMidland.com Programming your Clack WS1 FOB/FOC valve is simple. To Set Time of Day 1. Press “SET CLOCK”. Adjust hours with up or down arrow. 3. Press “NEXT”. Adjust minutes with up or down arrow. 5. Press “NEXT” to complete and return to normal operation. You can check these other settings but they will likely be already set. 1. Press the NEXT and up arrow buttons simultaneously for 5 seconds. 2. Press “NEXT”. hardness should be set to na. 3. Press "NEXT". Set days override to 3. 3. Press “NEXT”. Using the up or down buttons set the Regeneration Time similar to setting the current time above, make sure that if you have a water softener or any other kind of back washing filter that their regeneration times are at least 3 hours apart. 4. Press “NEXT” returning to normal operation. Please share this video • FOB FOC Installat... For more great information about water treatment, subscribe! / waterstoremidland https://thewaterfilterestore.com/prod... Follow me https://www.facebook.com/TheWaterFilt... https://twitter.com/FilterEstore https://www.linkedin.com/company/the-... or email info@TheWaterFilterEstore.com or info@TheWaterStoreMidland.com Check out our online store at TheWaterFilterEstore.com or our full service store in Midland, Ontario at TheWaterStoreMidland.com
