Search

See all of our over 30 Brands

Water Softener Installation Part 4C Programming Your Clack WS1 Water Softener

Water Softener Installation Part 4C Programming Your Clack WS1 Water Softener

 

Setting the controller or programming your Clack WS1 water softener valve is very simple. 

To Set Time of  Day

1. Press “SET CLOCK”.  Adjust hours with up or down arrow.

3. Press “NEXT”.  Adjust minutes with up or down arrow.

5. Press “NEXT” to complete and return to normal operation.

To Set Hardness

1.  Press the NEXT and up arrow buttons simultaneously for 3 seconds.

2.  Press “NEXT”. Using the up or down buttons set the hardness.

3.  Press "NEXT".  Do not change days override from 14.

3.  Press “NEXT”. Using the up or down buttons set the Regeneration Time similar to setting the current time above.

4.   Press “NEXT” returning to normal operation.